Spinning Head Sunshine cometh...

Happy autumn, everybody! My favorite season, and certainly the most picturesque in New England. Well, there's all types of good stuff going on, and the past month has been pretty busy. Quiet...but busy. So let's get to it.

First off, the big news is that test-shots for Spinning Head Sunshine (the armor) and Spinshine (the core/top) are in! And DAMN if Alec hasn't outdone himself yet again. So most of y'all have seen two sets of pictures so far, right? First were the original CAD drawings, then there were the 3D prints last time (of Spinshine, anyway). Now, we've got final rubber castings...and I gotta tell ya--it never ceases to amaze me how spot-on they are to the original CAD models. Check this out!

Alec is a master of his craft. It's simple as that. Look how dope these guys look! Well, first off, all three faces on Spinshine are super-crisp. Ashuraman would be proud.

And more importantly, Spinshine fits in the Spinning Head Sunshine (SHS) armor perfectly. Alec's rubber flexes nicely to accommodate the top, and the connection is nice and snug. I mean, that's not terribly impressive given that both toys were designed concurrently in CAD...but the big draw is obviously MUSCLE #195--also known as Sunshine F or "Spinning Top Sunshine"--being able to fit in the SHS armor.

Well, it works, damnit! It's not as seamless a fit as Spinshine, but that's because Sunshine F was sculpted by hand thirty years ago! Spinshine's geometrically perfect, with its precisely revolved geometry. When popped into the SHS armor, Sunshine F can feel a little awkward--it can vary from nice and snug to kinda loose and rattly just due to the inconsistent nature of the original sculpt. Still, it's not problematic because he's never in danger of being too fiddly...let alone falling out. The bottom line is that it works, and even if the seams are a bit more pronounced than on the Spinshine x SHS fit function, it still looks HOT!

And, oh, the colors! Alec sent me a couple translucent-opaque mash-ups...and they'll melt your eyeballs. I've noticed that neon pink or orange details get kinda washed out in my photos, and purples can look a lot more blue than they're supposed to, but hell if I know how to fix that in my camera settings! But whatever...you get the idea. The figures are fantastic in person.

And that translucent rubber is legit. Add a little back-lighting, and these things become epic!

So here's how it's gonna work: I'll be establishing a list on MUSCLEThings.com for those interested in purchasing. The MT list gets priority...so if you want yours sooner, head over, register if you haven't, and post in that thread. Once the MT list is done, I'll serve anyone on LRG who may not have replied on MT. I decided to go this route to drive some traffic Alec's way and to make sure the custom minifigure-casting community there gets love.

As for the price, just like AshuraShine, it's gonna be $20 for either figure (Spinshine or SHS). They're gonna be bagged and sold separately, and once someone's name comes up on the list, they're gonna have the option to buy up to one of each (though I may extend that to up to two SHS armor figures if mad heads want one for their existing Sunshine F...AND one to go with the brand-new Spinshine--we'll see).

But let's not get ahead of ourselves! Even if they're production quality, these are only test-shots. Hell, I haven't even gotten started on the header card! :P Soon, though...I hope you guys get a chance to see how neat these figures are in person!

And as for AshuraShine, production may have slowed down for the summer, but we're back on. In fact, I've got a big pile of multi-colored ones on my floor right now!

There are less than a dozen folks still patiently waiting for these guys on the LRG thread/list, so I'm going to offer them a chance to buy one of these AshuraShines of color, rather than waiting for the next round of traditional pink ones. I figure that's fair for making 'em wait so damn long.

...

Aiight, enough with the MUSCLE-hustle for now. Let's switch gears back to robutts for some quick Gin Gin updates.

First off, I need to get something off my chest. I unwrapped something that made my brain explode last night. Most of the fellas interested in 3D-modeling/printing over at TBDX have known that print shops like Shapeways have offered stainless steel printing for some time now. I guess the perception for a while has been...why bother? I mean, SLA processes offer FAR better resolution and general surface quality...and SLS offers light, durable plastics for more structural applications. Oh, and both SLA and SLS are *vastly* cheaper. Well, at this year's East Coast Chogokin Summit, I got a chance to see steel-printed minis from Roger Harkavy and from Ben of Prometheus Rising Studios. They were pretty damn neat, so I said "what the hell"...

Holy crap...on a crap cracker. Mind = Blown.

Baby Gin Gin...in all his 1-3/4" glory...rendered in indestructible stainless steel. I unwrapped this guy last night, and I simply haven't been able to put him down since. It's THAT awesome. Weighing in at 1.3 ounces, he's actually pretty damn hefty for his diminutiveness. And even if I squeeze (with just my fingers--no wrenches or other tools!) those tiny horns with all my might, I can't make 'em budge. Of course, I could see a shelf-dive potentially taking out a horn just given the weight of the figure and the momentum from a fall.

But just check out the finish. Pretty wild! The resolution is not nearly as bad as I thought it'd be--most of the surface features came out shockingly well. The issue, of course, is the finish. The layers are pretty clearly visible and there's that pitted texture. But I'll tell ya: the resolution of these photos tends to enhance the flaws. The figure is TINY...compared to the hugeness of these macro shots. In hand, this lil guy looks and feels great. The star emblems on the shields make me squeal like a little girl!

The figure stands super-firmly on the ground with no wobble whatsoever, but what was interesting to notice (see above) was that the bottom of his right foot is almost mirror-polished, while the left foot has the same pitted texture as the rest of the figure. I wonder if that's because the bronze was infused via the right foot (see Shapeways' page on stainless steel printing here...it's actually pretty neat), and thus needed to be machined clean after the process.

Anyway, I'm definitely printing more of these guys. Then again, at over $40 a whack...not TOO many more... ;)

And as for the Foe Gokin version of Gin Gin, we're making some good progress this week. I'm meeting up with paint-maestro, Matt Walker, to continue our paint color discussions. Also, I've officially fired the print shop who was handling the Foe Gokin slipcases. I'm praying to Aron Ra that the new shop I'm going with doesn't bend me over like the previous one...

Anyway, I've shown y'all the latest 3D print of the body, in polished alumide, but this is actually the first time anyone but Walker has seen the actual pewter casting from the print! All I can say is that it's tight. The geometry is much sharper than ever before because of alumide's ability to withstand high temperatures. Alumide's only weakness is the rough surface texture...but in the final castings, it turns out it's not too bad:

That Monster Kolor paint should have no trouble smoothing out those tiny surface pits. Also, if you notice above, we're trying something a bit different with the star marks on the shield. I think it looks a little better--more star-like?--and it shouldn't be tough to hand-paint.

That's it for this month, folks! Til next time...

Quick pics!

Took some nice photos this weekend and I thought I'd share them with you...

But first, I want to send a big shout-out to Nicole and Jim Shea of FOE store and art gallery in Northampton, MA. Friday night, they hosted an opening party for the "Summers Cauldron" art exhibit, featuring toys and artwork from Paul Kaiju, Rich Montanari Jr., Elegab, and Eric Talbot...and I was there to troll the inevitable parade of hipsters! Ha! For real though, I was urged to come through by my local vinyl cohorts...and I didn't really have any excuse *not* to go, seeing as how my girlfriend lives a block from the gallery. :P

Nah, it was really good to support Nicole and Jim. It was also great to meet some new heads who'd made the trip--chilling with Phil "hellopike" was an especially nice treat as I've always admired his Glyos-customizing work. Other east coast skullbrainers were there as well. For instance, meeting Rich "LASH" of Mutant Vinyl Hardcore (MVH) for the first time was cool since we'd only previously known each other online before...despite his being from Connecticut. Oh, and knocking heads with mecha-madman Todd Robertson is always a good thing!

Like I said, the local crew was there--atease, wingnut0, Prometheum5, David White of Mechazone, Jake of Pioneer Valley Roller Derby, and others I'm probably forgetting. Don't need no excuse to chill with those lads. But I think the big draw for me was meeting Paul Kaiju, finally, in the flesh. The man's been a member of our own ToyboxDX since 2002. Not too many folks know that! Well, the man's a scholar and a gentleman...and it was an honor to close down a local watering hole with him and Nicole and Jim Friday night.

Gallery openings, as you can imagine, just AREN'T my thing. But I was able to suck it up and ignore all the frothing about who was trying to score what exclusive. In fact, I ended up using my ironically great lottery pick (yes, there's a damn lottery to determine what order one can purchase exclusives in--otherwise, there'd be chaos) to throw down for the Mock Bat toy you see above. It's a vinyl kaiju toy Paul sculpted and had slush-cast in Japan using traditional methods. He hand-dyed the figure and added accent paint afterwards. I told him I didn't care about how R@R3ZORZ the toy was...but the fact that so much work--really, so much of himself--had gone into the toy, I was quite happy to buy it.

Anyway, I now REALLY wish I'd taken more pics at the show...but just google "Summers Cauldron FOE"--there should be plenty of coverage on the internets. You can see some of the art and toys here. And once again, big up to Nicole and Jim for putting on such a solid event!

...

Now for those quick pics I promised!

First up, the lighting was just crazy-good one morning so I decided to snap just a couple shots of the East Coast Chogokin Summit AshuraShine figures Alec cast specially for the gathering. There's hot pink, crystal clear(!), and a medium pink (not pictured) that's about halfway between traditional MUSCLE pink and the hot pink of the other figures for the event.

That clear is NO JOKE. I mean, Alec's casting is already flawless. And his plasticized rubber feels incredible. In my opinion, the clear just adds another level of professional quality to my man's work. Oh, and make no mistake about it: that hot pink will melt your eyeballs! ;)

Next, I just couldn't resist taking a couple Gin Gin shots in that same lighting:

So basically, it's like this: that body you see is the polished alumide print from Shapeways I've been talking about. Same with the head; however, it's starting to look like the final production heads will actually be straight-up printed in polished polyamide (along with the arms). And, yeah, those arms don't even match, but they're all I had laying around. Still...groovy pics!

And finally, the Spinshine prototype came in:

That thing *sucked* to photograph! All the details are microscopic...and the material (3D Systems high-res SLA) is translucent, so with light bouncing around inside, everything looks washed out.

Oh well...no big. It's already on its way to Alec's, so we should be getting test castings soon enough! ;)

Neglected child

That's what this blog feels like sometimes! I'll bring home a present or something to smooth things over...but *know* that junk ain't gonna work! Heh...oh well...

But enough about that! The East Coast Chogokin Summit was last Saturday, and as usual, it was glorious. I'm not going to dwell on it too much here, but if you get a chance, look it up on facebook (and soon on CollectionDX). There ought to be plenty of pics out there...along with some suitably embarrassing video of yours truly!

Suffice it to say that a great time was had by all. Every year, the number of attendees keeps on growing, and it's just exciting to watch this crazy thing evolve!

Anyway, let's get back to business. First, if anyone was interested in how last month's Lament Configuration turned out...well...the news ain't so good! See, the whole impetus to design the damn thing was that the hand-finished ones online cost $400 and up. Ouch! Well, even with 1.5mm walls, it's still $175 in polyamide from Shapeways! Guh. Yeah, not so fantastic. So I dunno...maybe I'll make a chisai keychain version or something. Who knows. At least the mechanism worked beautifully!

Gin Gin news? Well, things are accelerating in the right direction. I met with our intrepid paint master, Matt Walker, last week to go over some things. We're definitely on the right footing to get an actual working, properly-colored figure within a reasonable time frame.

I don't have any pics to show, but two major things need to be settled at this point. First, the production parts: I'm sending my local metal caster a new body made from polished alumide this week. Hopefully, this will be *it* for the body. The head is something I'm actually on the fence about. We can either continue to have it cast in pewter...or we can go with polished polyamide--the same stuff the arms will be done in. The latter would be more "authentic", because classic chogokin always had plastic heads...but the irony is that casting it in metal may actually be cheaper than 3D printing! We'll see. And finally, the aforementioned arms will be printed in polished polyamide coming from either Shapeways or i.materialise. It's a coin-toss right now because Shapeways' customer service is horrendous and their polyamide quality has been questionable as of late. On the other hand, i.m can only become remotely price-competitive IF you buy in bulk (~10-20 sets of arms per order). Again, we'll see...

And second point to settle is the paint itself. Some of the colors on the paint master were off. Blues were too light, greens were too dark. Y'know...that sort of thing. The biggest issue was actually the color mapping. I guess there was some miscommunication at some point, and the color map we were looking at was an older, more complex version. I had since redefined the map to 1) cut down on work for us, and 2) bring the toy more in-line with the clean, simplified look of Popy ST's. Hopefully, in the next couple of weeks, we're going to iron out all these details while I tighten up the packaging details with my printer.

...

AshuraShine is still going strong. The end of the LRG preorder tunnel is in sight: once Alec and I get to the end of the list, I'm going to start advertising and selling on other sites.

Again, I don't have any pics to show yet, but I got some special figures from Alec to show off some fantastic colors! Among them are crystal clear and hot pink...and lemme tell ya: they're absolutely killer. I sold some of each at the Summit, but I've got a few left. I'll probably photograph them and post them for sale soon!

And now for this month's big news! My next MUSCLE design, Spinning Head Sunshine (SHS)! Now, this requires some 'splainin', so check this out. Above, you see good ol' MUSCLE #195, Sunshine (f) or "Spinning Top Sunshine". As y'all know, I've always loved Sunshine and all the weird shapes he could morph into. Well, the problem with this particular version of him is that, well...he can't exactly stand on his own.

In fact, he looks kinda like a doofus just sitting there on his ass. So the idea was to give him a bit of an upgrade! Peep this:

Yes--basically brick power armor for your #195! As you can tell, it's super-chunky...and I kinda dig that. What's cool in my opinion, though, is that it's actually no taller than your average MUSCLE. Anyway, these suits will obviously be cast in rubber by Alec. As such, the shoulders can flex apart as you stuff your Spinning Top Sunshine into the central cavity. The effect should be pretty killer!

But wait! There's more!

See, when I was talking to Alec about this design he brought up some important caveats. First of all, he'll be casting SHS in the same color and consistency across the board, right? Well, people's #195's may vary quite a bit. Remember--these toys are close to 30 years old! Some have been left out in the sun, some of them have been microwaved, some of them have been up kids' butts (yes, look twice at that lot of loose MUSCLEs you just scored offa eBay!). The colors--and sometimes, even shapes--may have changed with age. Or who knows: maybe it was a bad day at the factory and the color mix was off for that batch. Or maybe the figure was yanked from the mold before the PVC could set properly.

Either way, there's a chance your pink MUSCLE may not match Alec's pink SHS perfectly. And, hell--what about folks who don't even have a #195 but still want the suit??? So Alec's suggestion was actually to offer a replacement Spinning Top Sunshine! Thus, the birth of Spinshine:

SHS and Spinshine basically comprise "part 2" of my Sunshine trilogy, but honestly, I'm already getting a little sick of all these bricks! :P So with Spinshine, you can see that I decided to stretch my CAD muscles a little bit further than usual and come up with something more creative. Those familiar with Spinning Head Ashuraman--my source of inspiration with this toy--can immediately see the similarities. Spinshine's tri-face/symbol design is quite a bit more complex than AshuraShine. Check it out:

He's designed to fit SHS perfectly, and obviously, Alec will be able to match the colors precisely. AND we'll be able to pull off crazy colors/effects, instead of being stuck with folks' stock #195's. Like, can you imagine a crystal-clear SHS with a glow Spinshine in the center?? Dope.

As you may have noticed, Spinshine's head (heads?) is a bit bigger than the stock #195's head...but I think it fits in better with the combined Spinning Head Sunshine look:

These images will likely find their way to LRG soon, but let me know what y'all think! I can't wait to get feedback on this figure. As for taking orders, we're still a little ways off--the master prints from Shapeways (in 3D Systems' hi-res polymer) will probably arrive in a week or so...then off to Alec for molding and review by me. Stay tuned, of course, for more info! ;)

Oh, I have such sights to show you...

Heh...so check this out. A couple weeks ago, I was chilling with Nekrodave formerly of CDX, TBDX, UMA, and other unholy places on teh internets. Among the many cool things we were watching on his new HD projector, we decided to throw on the latest direct-to-video Hellraiser (part 9; "Revelations"), which neither of us had seen yet. It was...meh.

The plot/concept was actually pretty solid...but the subpar acting and utterly uninspired directing really kinda ruined it. Oh, but the most notable flaw was that they got some new jamoke to play Pinhead. No Doug Bradley = FAIL. It's science.

But whatever. It was worth checking out...

The one thing I sorta recalled, however, was that I've always wanted a working Lament Configuration, the puzzle box Lamarchand constructed to open a pathway to Leviathan's realm (uh...Hell? whatever--I'm not Christian). Dave didn't seem interested 'cause he's not into collecting stuff from modern horror flicks...but I just knew *someone* had to've made a damn working Lament Configuration.

And someone did. Oh boy, they did. In the US and in Germany, in fact. But both at over $400...eh...just not the kind of investment I wanna make. Granted, both of those prop replicas are hand-made from stained wood and brass...so they're likely worth ever penny. But you know me! ;)

Yeah, it was pretty obvious where this was going! Just as a fun side-project, I'm making my own "poor-man's" working Lament Configuration. After a while, designing the same sort of thing (toy action figures) starts to grate on your nerves, so this was a nice distraction to help me stay sharp, focused, and creative.

I'm probably just going to have this thing slide apart in the "star formation", the final movement phase that actually summons the Cenobites. In the movies, the box makes other movements as well, but it'd be mostly impossible to make a single unit capable of doing them all as seemlessly as they appear in the movies.

So the past couple weeks have been spent solid-modeling all these crazy details on the faces of the cube. The images above are legit screenshots from Pro/E...fortunately, they have "metallic gold" and "stained elm" colors built in! Anyway, the minute details don't precisely match the original artwork--I wasn't about to drive myself nuts by replicating the images I downloaded of each face perfectly. At least each face will be different on my model (there are minor differences from one side of the box to the other, though they generally appear to be the same).

Later this week (hopefully), I'll carve up the model into the two working parts. We'll see how it goes. I'll be sure to post my results here!

...

Anyway, here're some updates on the rest of the crazy stuff I'm working on. First off, the next big run of AshuraShine figures is in, bagged-n-tagged, and ready to ship! I just need to start bugging folks on LRG for money. ;)

There aren't enough yet to finish off the list, but this is gonna be a nice big bite taken out of it. And after that, we'll be doing smaller runs of glow, color-change, translucent, etc.! Very hot. But honestly, even more exciting is what MUSCLE Things and I have planned. First off, just check out his new site--it's a forum now mainly for us custom-MUSCLE heads! But besides that, there are a bunch of new (and ancient!) designs getting the MUSCLE treatment soon. Very damn cool...

...

And here's the latest on our pal, Gin Gin. Well, the paint master is being finished up right now, if you can believe it. And just in time for a mold change! Haha! For real, there's a bunch of weird factors that have come together to make this mold change the right move at this point. First off, if you've been following our (me and B00) 3D printing exploits on TBDX, you know that we've been crazy-busy vetting a number of 3D print-on-demand services out there. Well, as insane as it sounds, it looks like Shapeways is still the overall right choice for production arms on Gin Gin (polished polyamide). It's mainly about price at this point. I'm just praying that they can keep their quality standards reasonably high...

Also, I got a new print of Gin Gin's body and head in a new Shapeways offering: "polished alumide". If you recall ages ago, I got an alumide print (it's basically just aluminum powder mixed in with the polyamide powder in the usual SLS process) of just Gin Gin's head. The surfaces were ultimately too rough to get a good vulcanized rubber mold from...but because of the high heat tolerance, the overall geometry looked gorgeous (no nicks, cuts, warpage, or any weird bubbly looking flaws of any sort). Anyway, my new prints in this new "polished" stuff look really nice and smooth, so I have high hopes they'll yield an ideal mold.

Anyway, the actual mold changes, themselves, are minor at best. But whatever. I just can't wait to see the paint master...!

...

Lastly, one quick note about the "Throne of Chaos" Unicron stands. I've been getting sporadic e-mails here and there from folks all over the world asking for them (BBTS is sold out and it looks like they're not interested in stocking more). Well, unfortunately, I'm done with storing and shipping these damn things on my own!

There IS hope, however: I'm still in touch with my acrylic fabricator, and I'm sure he'd still be cool with doing smaller wholesale orders. So what I've been telling folks is to go to their favorite TF board online and start a thread about doing a wholesale group-buy. If someone can get a bunch folks together, one person can be in charge of collecting the money, receiving the stands, and shipping them out to everyone else. Obviously, I would forward the money to my fabricator and have him ship directly to whomever gets nominated (and I would personally ship that person the inserts).

It seems that group-buys are pretty common on the bigger/more popular message boards...but either way, I'm done with selling these things on my own. Of course, the alternative is that someone could just bootleg my bootleg stand! ;)

Til next time...I'm out!

Pictorial update!

Happy May! First, let's start off with a little exciting news: AshuraShines are in and I'll be shipping soon!

But we must temper that excitement: I've got just over a dozen...and there are about 40 or so folks waiting patiently for these so far. My hero, Alec, is unleashing his unholy sorcery and cooking these guys up at full speed (which, as adult humans with real lives, may not be fast enough for some...but it is what it is). And incidentally, the next few designs we have planned are going to make people's brains explode! And, yes, that's "next few designs": AshuraShine's just the beginning!

Let's not get ahead of ourselves, though...

Okay, for the first time publicly, let's take a look at AshuraShine's packaging!

Simple but effective, I think. Feel free to comment...I always feel a little insecure about packaging art as folks often tend to have strong opinions about it. Can't please everyone! But I'm definitely open to suggestions and interested in seeing what really gets heads hot and bothered.

And just one last quick thing on AS before I switch gears: there was some question recently about how well effects powders work in Alec's rubber. In my last post, I showed some white prototype figures that were every bit as tough as the standard dudes...but actually changed color in the sun. Well, instead of just telling you that...I'ma show & prove. Peep this:

The dude in the middle uses a powder that's supposed to change from white to red...but there's just something about the rubber most casters are using that renders it completely inert. Bizarre. Someone should let Wolf know...but I ain't really sweatin' it. Anyway, whatever--check out those purple/indigo dudes on either side!! DAMN. That ish is fire!

Now, we don't have any test figures using any glow powders, but I know heads on LRG have some glow customs by Alec, and they say they glow crazy-bright. I have no doubt in my mind we'll be able to rock domes with glow soon enough...

Okay, I wanna switch gears real quick...back to my first love: Japanese robots. All the TBDX heads have been patiently waiting for any signs of life from the Foe Gokin project. Well, as y'all know from reading the blog, the fronts of the shields have been in this weird state of limbo for ages. Originally, we were planning on embossing all of the visual detail in order to facilitate hand-painting it. Then we tried to get cute and engrave those areas to serve as templates for applying stickers.

Not a bad idea, right? Stickers are damn cool. The problem, however, is that there have been non-stop issues with getting the stickers to lay flat and conform to the conic shape of the shields. It should be possible in theory...but *in practice*, it's apparently been a nightmare. At this point, we're honestly considering going back to the original idea of embossing the detail so we can hand-paint it.

So instead of just telling y'all about it, I'm posting some pics of the latest design, incorporating the embossed detail! Check this out...

What you see above is a print in Shapeways' "polished White Strong Flexible", their marketing gibberish for selective laser sintered (SLS) polyamide (polished). It's not bad at all. But those keeping up with Shapeways' shenanigans elsewhere have probably heard that their consistency has gone down the pooper. Folks dealing with them have been getting polyamide parts with horrible surface finishes, soft edges, and even sinkholes.

As an alternative, I'm looking into having the arms made by i.materialise, a company HIGHLY recommended by our buddy, Mike at FreeTime Toys. I'm actually having the same left fist/shield front you see above printed in their Prime Gray material. Dunno what "Prime Gray" means (and I'm wary of marketing nonsense), but it boasts high resolution, impeccable surface finish, and material strength that supposedly rivals polyamide. We'll soon see!

Anyway, back to the latest arm design. Did I mention the frickin blade spins!? Uncle Warren will be pleased. ;)

Oh hell, yeah!

I've also revised the thicknesses of the walls to make the profile a bit slimmer. Looks gooder that way. And going back to Jon's comment from November, I decided to add the concavity back to the reverse face of the shield. All in all, I think it looks pretty smokin'!

Well, I think that's it for now, folks. Stay flossy!

The army grows...

Whaddup, peoples???

Okay, okay, I really need to make my posts less sporadic. It's true. I just figured I'd successfully bought myself some time by dropping the big production AshuraShine news last time! :P But I guess that cred has long since run out, huh? LOL

Aiight, well, here's hopefully a proper update!

Yes, AshuraShine "mass production" is in full-swing (heh)! This is happening...no busters over-promising and under-delivering. What can I say? Alec is The Man. Working with him has been a breeze. And it hasn't been ALL "work" either: besides production AshuraShines, we've been putting our diabolical minds together for some bizarre experiments. So not only are standard pink figures on the way, but there'll definitely be some runs of figures featuring bizarre effects! Check out the prototype posse:

A couple of the white figures feature color-changing powders from Wolf Voigt's SolorColorDust.com site! I didn't get a chance to shoot any outdoor pics of 'em, but just watch that youtube video...this stuff's no joke. Alec hadn't worked with Wolf's powders before, so it was a little bit of a learning experience. Let's just say they WORK! So after the first waves of pinkies go out,we're gonna have some fun!

Next up, we messed around with translucent dyes. Nothing mind-bending here, but c'mon...that's dope! You almost wanna pop him in your mouth (please don't! I ain't trying to mess with any lawsuits! :P )...

And then we tried pouring gold glitter into the clear/amber rubber concoction. Absolutely wild! All the gold settled to the "bottom" during cure (really, the top, since the figures are cast upside-down). It's really hard to make out the detail in the photos because the light reflecting off all the gold glitter is scattered in so many different directions...but that sharp detail is all there...

Y'know, I think the best part of all this testing has actually been seeing how damn durable these toys are! Remember before the LRG fellas hooked me up with Alec, I'd not only never handled a rubber-cast toy...I'd simply *never heard of* rubber designer toys! As far as I was aware, underground/DIY folks were casting their own stuff at home in resin. And resin can be pretty strong...but it's just not Onell-tough! This rubber? Onell-tough! [Yes, I just wanted an excuse to post those youtube videos we made years ago! :P ]

And it only gets better: I've noticed that the addition of powders actually has NOT made these lil figures more brittle or otherwise susceptible to breaking. See, conventional wisdom says that if you mix a bunch of powder (glitter, coarse glow powder, fine thermo-/photochromic powders, whatever) into a binder or matrix, well, you have less of that actual structural stuff per unit volume to hold the thing together. So a rubber toy *with* lots of powder in it should have LESS RUBBER than the all-rubber version, right? Well, since the rubber's spread a lot thinner in the powder-infused toy, it should theoretically be a lot more prone to tearing.

Well, I'm happy to report that I've been carrying around one of the white AshuraShine prototypes (infused with photochromic powder that turns deep indigo in the sun!) in my pocket for several weeks. Besides getting a bit dusty, he's survived getting shoved in and yanked outta my pockets hundreds of times, I've thrown him against the pavement here and there, and I even tried to rip one of the arms off (lightly, of course--I'm trying to simulate rough play, not a fight with my ex!). Not a scratch! I'm sold, y'all. Rubber's what's up.

Okay, more on MUSCLEs next time. Alec and I have plenty more ill stuff planned for y'all, so stay tuned. AshuraShine's just the beginning!

And before signing off, I just wanted to post a quick Gin Gin update. The saga continues. I've talked to Walker a bit more about the problem. As it turns out, it ain't the paint. In fact, if the toy were to be *fully* painted, we'd probably be done by now. We'd probably have been done by 2012! Apparently, all this time has been spent wrestling with the stickers--specifically on the shields. Lots and lots and lots of wasted vinyl decal. No luck yet. So Walker's down to a couple final tricks up his sleeve to try to get them to work...but if all else fails, we're actually going BACK to the early (think Yojimbo) style arm shields with engraved/embossed details that we're just gonna hand-paint. We'll see what happens!